Custom Built Black Onyx Finish Wine Rack | Pre-Assembled
Only 747 left in stock
If you would prefer a system with a larger storage capacity ( over 3ft in height or width), please contact us for a tailored quote.
Custom build your wine racks to precisely fit the dimensions of your space by selecting a desired width and height to customize your order.
If you would prefer a system with a larger storage capacity ( over 3ft in height or width), please contact us for a tailored quote
Depth: 9.25" (235mm)
Note that the height listed does not include the extra row of bottles which can be added along the top.
A full set of Neck Protector Clips are included. These simply attach to the wine rack, preventing the bottle from scratching. This modular wine rack can also be very easily connected to other wine racks with a set of connector clips.
Note: The dimensions of each hole are 3.76"x3.76" (95.5x95.5 mm), so it will fit most of the bottles, but unfortunately, it will not fit all bottles in the market. If your bottle is larger or wider, then it will likely not fit.
Assembly shouldn't be too difficult and is manageable for most customers. If you're a confident flat-pack builder, you may want to get the un-assembled version at a lower cost than the pre-assembled one.
Assemble & Installation
- Wine Rack Assembly Instruction
- Sloped Wine Rack Assembly Instruction
- Large Wine Rack Assembly Instructions
- Wine Cubes Assembly Instructions
- WRT480R2 Double Sided Commercial Retail Space Wine Rack Assembly
Our Timber Wine Rack includes a complete set of neck protector clips at no extra charge. On top of providing added protection for your wine bottles, the clips also prevent the bottles from scratching each other.
You can connect this wine rack to other similar racks with a set of connector clips (horizontal and vertical) and connector pieces (horizontal). These components work together to enable you to seamlessly expand your wine rack to suit your needs and provide added wine storage capacity.
Wall brackets are also available for those who need to connect this wine rack to an adjacent wall. Sold separately, our 9.26" (235mm) length wall brackets will work with any wine racks sold by KingsBottle.
Note: It is recommended to have 4 brackets per square meter (10 sqft), or 4 brackets per unit (one at each corner).
We offer two versions of this wine rack: pre-assembled and unassembled. Our unassembled wine rack may be difficult for some people to set up at home. However, we engineered this wine rack to have a simple setup process. The main issue that people encounter is the need of a rubber mallet, which may also be purchased from us or other tool retailers.
Assembly service is available and optional, we are happy to provide the the Assembly Service.
Please allow for 30 minutes to assemble a 50 bottle wine rack and up to 60 minutes for a 110 wine rack.
Assembled wine racks are carefully put together in the United States. You can shop with full confidence that you’re supporting American manufacturing.
- All shipping services are fulfilled by 3rd party carriers.
- Any shipping service (Threshold Shipping, White Glove Shipping, Expedited Shipping) is one-time service. During warranty, only Curbside Shipping will be provided. If you need any of the Threshold Shipping, White Glove Shipping or Expedited Shipping during warranty, you could purchase it from us.
- Due to the influence of COVID-19, the white gloves delivery is unavailable in some areas. If you purchased the service but it is not available in your area, we will contact you to cancel the service and refund.
QUESTIONS & ANSWERSAsk a Question
is this rack floor standing?
The wine racks should stand on the ground or have a solid surface to support the weight of the racks and bottles. You can not just hang it on the wall. If you are looking for wine racks hand on the wall, you can refer to our wine pegs.
I have a space that previously held a small bar freezer. The height of the area is 24.5 inches. I could build a 5-hole (leaving the top layer open) or 6-hole configuration (taking up practically the entire available height of the opening) but am unsure which would be more visually appealing. Do you have any suggestions? Thanks.
We will recommend 5-hole configuration, so you can see the bottles on the top row, and this will save cost as well.
The unassembled racks were very easy to put together and look excellent. I would recommend King's Bottle to anyone who needs a storage system for their wine.
Very happy with this wine rack, we were able to use a custom size to fit an unusual space.
Extremely happy with the service and the quality of the Custom Built Wine Rack. Assembly was easy and smooth. Definitely recommend.
Custom Built Wine Rack | Rustic (Hardwood) Finish | Un-Assembled
We are so happy with the quality of our Kingbottle wine rack. We ordered the wine rack pre-assembled after reading a few reviews and with the cost difference really not that much we were glad we did. I couldn't be happier with how well packaged it arrived and the quality of the finish. It looks fantastic on display with all the wine bottles.