Custom Timber Wine Rack | Rustic Hardwood

Great wine rack. Relatively easy to assemble after mucking around with the first one. Rack looks beautiful especially after filled with wine.

Im really happy with the wine rack, great quality and great service.

I got a temp/humidity controlled wine storage unit with fixed space so I wanted a solution that is compact and inexpensive. I am super happy to find the solution from Kings Bottle as the rack is easy to assemble and they have been holding really well with my heavy bottles. I'm lucky that the 6x6 configuration works just fine but I do believe they have the solution to customize it also.

The 42 bottle rack in black was a perfect fit for our bar. It looks so much neater and organised than having bottles sitting on top.

Bought the Timber wine rack to fit in an alcove in my basement under the fireplace. The fit was perfect, and I have loaded it up with reds and whites that need to be cool but not necessarily kept in a wine fridge for long-term aging. I ordered mine unassembled, and I was careful when I did assemble it. This wine rack is best assembled on a hard surface like a basement floor. They provide an extra piece of wood (square dowel rod), which was beneficial, as one of the other ones in the kit was not cross cut at one end (necessary for assembly) -the extra piece made it a non-issue. The trickiest part is assembling the second set of metal strips (dowels already attached to metal strips at the bottom, and now the second set needs attaching). I appreciate that they sent two extra metal strips in case I made a mistake and bent one out of shape. Didn’t need it, because I went nice and slow, and I gently used the mallet to tap them in place, going over the structure in cycles to slowly tap them in place. Once assembled, the wine rack was slightly askew, but once I situated it and loaded it with wine, the weight of the bottles caused everything straightened out. The rack comes with plastic protectors that one can clip onto the metal strips, but I didn’t use these, as I have many Pinots, GSMs and Chardonnays that just exactly fit (but would cause the plastic pieces to pop off above). Don’t think I need them, but I have kept them for potential future use. All told, it took me a couple hours to assemble, and that is just fine by me. In the end I now have a nice, sturdy wine rack that I feel has little risk of ever tipping over. I bought it for the generous spacing and appreciate that it holds my wide-bottom bottles so well. I definitely recommend this wine rack, and I expect it to last for years without fail.

This is a piece of junk. Comes in a thousand pieces. Took all day to assemble because a rubber mallet does not work, need to use a real hammer to get the pieces together and this damages the wood. Then the company says if its damaged its not returnable. Once assembled hours later realized all the cross bars for one side are missing. No way could I take this thing apart to return. It looks good but it’s not stable. Will have to call company for missing pieces. I am a metalworker so to explain this item is easy to build just takes a really really long time and its hard on your hands in terms of repetitive hard hammering. Do not order if have arthritis like me! Cost should be $100 not close to $300! See second photo. In the back, you can see that there are only 2 vertical cross bars , 7 are missing and not in box. In photos, each line of bottles has separator bar front and back, but not enough bars were sent to complete it.

Needed a specific size to fit into a stand-in pantry under the stairs, and it didn’t disappoint. Very happy with how much storage we got from it and how it adds visually to the space. Chose to build them ourselves. Arrived quickly and after sales service to change wall pinning accessory was excellent. Highly recommend.

We ordered the custom built wine rack in black onyx and are extremely happy with both the quality and service, was made to exact specifications, delivery was very fast and it was very well packaged for delivery to ensure no damage in transit. Very happy.

We purchased a custom built wine rack, rustic hardwood finish and pre-assembled. we had it made to fit into one of our cupboards. It was so easy to customise it and the service was fantastic. We ordered it online and accessed all the information with dimensions etc online, it has all been set out so customer/user friendly that it is easy to do. The wine rack arrived within the time they had promised, and it did not disappoint. We love it and are so pleased with it. We highly recommend KingsBottle!

I found this to be a very well made if somewhat tricky unit to assemble (partly due to needing to trim slightly to fit my location).
The only complaint I have with the unit is the unfinished ends for the timber rails the bottles sit on.
Where the finish on the sides was perfect the visible end of the wood was unfinished timber and would be a much better result if these were also stained to match the sides of the timber.

I was needing to replace three 3x3 ikea wine racks, as I could only fit 6 in each rack (18 total) because of the small space they were in. The KingsBottle range meant that I could get a 2x10 and can now fit 30 wines (including bulky wines that can on top).

It turns out I could probably have fit a custom-made 2x12 rack. KingsBottle offer custom range wine racks too. Delivery was easy as well.

How hard could it be to put together I said to myself? The answer was not too hard but awkward when you don't have the space. Up and filled in a couple of hours.

This is such a simple looking rack, but oh, so sturdy. I made the decision to get it already assembled and it was worth doing. I have yet to fill it but it won't be long! Thank you for offering this service

Ordered 4 wine racks in black. Delivered quickly and easy to assemble once you get going. Look great in the cabinet

Ordered a narrow and tall rack for a small space. Love that it could be customised.
Quality was great, fast shipping.
Very happy with it.

Very happy with the product and delivery time

Great wine racks a little tricky to put together but once you have done one it gets easier. Great service from the company. Solves your wine storage gets your wine on display and off the floor. Only 83 more bottles to go

The wine racks are a good product; I connect 4 together for side walls (2 side-by-side & above), anchored into wall and framed with black timber all round to finish. The cubes however are a little disappointing but i managed to make a feature using 9 cubes (4 x "X" + 4 x rack + one 2-shelf display) and once again, framed in timber (kickboard, sides, across the top). All in all, i am happy with the result with thanks for the support and guidance of the team at KingsBottle.

I've now installed the Kingsbottle Wine Racks acquired some time ago. It is a large wall format, of two walls, each with 4x "10x11" combinations, with joiners both vertically and horizontally. It was largely assembled in 2 stages - assembling the 8x "10x11"s, then a bit of a wait as I needed the cool room / wine cellar work done before they could actually be joined up in situ.

It's come together very well. The installed wine racks have a max capacity of 1008 bottles (2x 504 btls).

Imagery shows the right-hand-wall with bottles, and the left-hand-wall just installed.

There were two learning curves to note: Firstly, (mandatory for all) the assembly of the 8x combinations improved quite dramatically between the first & the eighth combo. Use YouTube and the supplied links to review and learn from. Secondly, fixing them to the walls - depending on the arrangement, there is increasing difficulty awaiting some first-timers like myself. Think of and plan for the sequencing of the assembly, and any drilling needs careful planning and measuring accuracy for it to work out well for you.

Highly recommended.